HIKVISION DS-KM8301 - Remote Configuration via Batch Configuration Tool; Remote Device Activation

Video Intercom Master Station·User Manual
22
4 Remote Configuration via Batch
Configuration Tool
You can configure and operate the video intercom devices via Batch Configuration Tool.
Default parameters of master station are as follows:
 Default IP Address: 192.0.0.64.
 Default Port No.: 8000.
 Default User Name: admin.
4.1 Activating Device Remotely
Purpose
You are required to activate the device first by setting a strong password for it before
you can use the device.
Activation via Batch Configuration Tool, and Activation via iVMS-4200 are supported.
Steps:
1. Run the Batch Configuration Tool.
Figure 4-1 Selecting Inactive Device
2. Select an inactivated device and click the Activate button.
Figure 4-2 Activation
3. Create a password, and confirm the password.