Video Intercom Master Station·User Manual
17
3. Press the tab to start a video intercom call.
4. Press the tab to stop the video intercom call.
The master station No. format should be like 1-51 as Community 1, No. 51. The
community No. can be omitted.
Switch to on the upper right corner to enable the camera function.
Figure 3-16 Calling Master Station Interface
3.5.3 Adding Resident Information
Steps:
1. Press the tab on the touch screen to enter the contact list interface.
2. Press the Add Contact tab.
3. Enter the corresponding residents’ information required on the pop-up adding
dialogue box.
4. Press the tab on the upper left corner of the dialogue box.
3.5.4 Viewing Call Logs
Steps:
1. Press the button on the touch screen to enter the Call Log interface.
2. Press tab Missed Call or All Calls to view missed call logs or all call logs.
To Next Page
Loading...
Need help?
General
