HIKVISION DS-KM8301 User Manual

Video Intercom Master Station·User Manual
14
 The default Port No. is 554, the default user name is admin.
 The port No. should be consistent with the RTSP (Real Time Streaming Protocol) port
No. of the IP camera.
 When the IP camera added successfully, you can get the live view of IP camera on the
live view interface.
Adding DVR/DVS/NVR
Steps:
1. Press the Add Device tab to pop up the Select Device Type dialogue box.
2. Select DVR/DVS/NVR.
3. Enter the corresponding device information required on the pop-up device adding
dialogue box.
Figure 3-12 NVR/DVS/NVR Adding Interface
4. Press the tab on the upper left corner of the dialogue box.
 The default Port No. is 554, the default channel No. is 1, and the default user name is
admin.
 The port No. should be consistent with the RTSP (Real Time Streaming Protocol) port
No. of DVR/DVS/NVR.
3.4.6 Synchronizing Time
Steps:
1. Get to the configuration interface: Settings -> Configuration, and enter the admin
password (configuration password).
2. Press the Sync Time tab.
3. Switch to to enable NTP.

HIKVISION DS-KM8301 Specifications

General

Brand	HIKVISION
Model	DS-KM8301
Category	Intercom System
Language	English