HIKVISION DS-KM8301 User Manual

Video Intercom Master Station·User Manual
28
General
Click the General button to enter device general parameters settings interface. You can
view and edit the device name and device ID.
Figure 4-13 General
Time
Steps:
1. Click the Time button to enter the device time settings interface.
Figure 4-14 Time Settings
2. Select Time Zone or Enable NTP.
 Time Zone
1) Select a time zone from the drop-down list menu.
2) Click the Synchronization button.
 NTP
1) Check the checkbox of Enable NTP to enable NTP.
2) Enter the server address, NTP port, and synchronization interval.
 DST
1) Check the checkbox of Enable DST to enable DST.
2) Enter the start time and end time of DST, and set the DST bias.
3. Click the Save button to save and realize the time settings.

HIKVISION DS-KM8301 Specifications

General

Brand	HIKVISION
Model	DS-KM8301
Category	Intercom System
Language	English