Rail Network Video Recorder User Manual
47
Figure 7. 3 DST Settings
Click the Set button of Advance Settings, and you can configure the advanced parameters for display.
Device Name: Input the system name as desired in the text field.
Device No.: Edit the device No. for remote control. The device No. ranges from 1 to 255. The default
device No. is 255.
It is recommended not to modify the Device No.. Otherwise, you need to input the Device No. on the
remote control every time you use it.
Brightness of CVBS: Adjust the video output brightness.
Menu Transparency: The transparency proportion of the menu displayed on the live view interface.
You can set it as 1:3, 1:1, 3:1 or Non-transparent.
The smaller the proportion value is, the more transparent the menu is.
When the Not Transparent is selected, only the menu is displayed on the interface.
Operation Timeout: If no operations are done during the selected time, the live view interface will be
displayed automatically.
Figure 7. 4 Advanced Settings
To Next Page
Loading...
Need help?
General
