HIKVISION DS-TCG405-E - Set Vehicle Feature Parameters; Set Image Encoding Parameters; Set Capture Overlay

Steps
Note
Some models do not support vehicle features recognion. The actual device prevails.
1.
Go to Conguraon → Device Conguraon → Capture Parameters → Vehicle Feature .
Figure 3-5 Set Vehicle Feature Parameters
2.
Check the vehicle features to be recognized.
3.
Click Save.
Set Image Encoding Parameters
If the captured pictures are not clear, set the resoluon of the captured pictures and the picture
size.
Steps
1.
Go to
Conguraon → Device Conguraon → Encoding and Storage → Image Encoding .
Figure 3-6 Set Image Encoding Parameters
2.
Select Capture Resoluon.
3.
Enter JPEG Picture Size.
4.
Click Save.
Set Capture Overlay
If you want to overlay informaon on the captured pictures, set capture overlay.
Steps
1.
Go to Conguraon → Device Conguraon → Text Overlay → Capture Overlay Conguraon .
2.
Check Capture Picture Overlay.
Entrance and Exit Capture Camera User Manual
11