HIKVISION iDS-7200AHQHI-M Series - Page 8

Safety Instrucon
• Proper
conguraon of all passwords and other security sengs is the responsibility of the
installer and/or user.
• In the use of the product, you must be in strict compliance with the electrical safety
regulaons
of the naon and region. Please refer to technical specicaons for detailed informaon.
• Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with 100 VAC to 240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to
technical specicaons for detailed informaon.
• Do not connect several devices to one power adapter as adapter overload may cause over-
heang or a re hazard.
• Please make sure that the plug is rmly connected to the power socket.
• If smoke, odor or noise rises from the device, turn
o the power at once and unplug the power
cable, and then please contact the service center.
ATM Digital Video Recorder User Manual
vii