HIKVISION iDS-7200AHQHI-M Series - Configure Transaction Information

Figure 8-1 Data Package
2. Set Data Format in Data Package Start Tag.
3. Set Start Tag for the data package according to Data Format.
4. Set Data Format in Data Package End Tag.
5. Set End Tag for the data package according to Data Format.
6.
Oponal: Filter specied content.
1) Check Enable Filter.
2) Select a format in Data format.
3) Enter the content in Content.
4) Set Content
Posion
7. Click OK.
8.5.2
Congure Transacon Informaon
The device can analyze the transacon informaon which is contained in the captured message,
including the card No., transacon behavior, transacon amount and serial No.
Steps
1. Click Transacon Informaon.
ATM Digital Video Recorder User Manual
68