HIKVISION iDS-7200AHQHI-M Series - Sudden Scene Change Detection

4.3.10 Sudden Scene Change Detecon
Scene change detecon detects the change of the surveillance environment aected by external
factors, such as the
intenonal rotaon of the camera.
Steps
1. Go to System → Event → Smart Event .
2. Click Sudden Scene Change.
Figure 4-14 Sudden Scene Change
3. Select a camera to congure.
4. Check Enable.
5. Oponal: Check Save VCA Picture to save the captured sudden scene change detecon
pictures.
6. Drag the Sensivity slider to set the detecon sensivity.
Note
Sensivity range: [1-100]. The higher the value, the more easily the change of scene can trigger
the alarm.
7. Set the arming schedule.Refer to Congure Arming Schedule .
8. Set the linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
ATM Digital Video Recorder User Manual
46