HIKVISION iDS-7200AHQHI-M Series - Chapter 4 Event; Normal Event Alarm; Configure Motion Detection Alarms; Configure Video Loss Alarms

Chapter 4 Event
4.1 Normal Event Alarm
4.1.1 Congure Moon Detecon Alarms
Moon detecon enables the device to detect the moving objects in the monitored area and
trigger alarms.
Steps
1. Go to System → Event → Normal Event →
Moon Detecon .
2. Select a camera.
3. Check Enable.
4. Set the
moon detecon area.
Full screen Click to set the full-screen moon detecon for the image.
Customized area Drag on the preview screen to draw the customized moon detecon
area(s).
5. Set Sensivity (0-100). The sensivity allows you to calibrate how readily movement triggers
the alarm. A higher value results in the more readily to triggers
moon detecon.
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage
acons. Refer to Congure Linkage Acons .
4.1.2
Congure Video Loss Alarms
Video loss detecon detects video loss of a channel and takes alarm response acon(s).
Steps
1. Go to System → Event → Normal Event → Video Loss .
2. Select a camera.
3. Check Enable.
4. Set the arming schedule. Refer to
Congure Arming Schedule .
5. Set linkage acons. Refer to Congure Linkage Acons .
4.1.3
Congure Video Tampering Alarms
Video tampering detecon triggered an alarm when the camera lens is covered and takes alarm
response acon(s).
Steps
1. Go to System → Event → Normal Event → Video Tampering .
ATM Digital Video Recorder User Manual
30