HIKVISION iDS-7200AHQHI-M Series - PIR Alarm; Target Detection

4.3.12 PIR Alarm
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector vision eld.
The heat energy dissipated by a person or any other warm blooded creature such as dogs, cats,
etc., can be detected.
Steps
1. Go to System → Event → Smart Event .
2. Click PIR Alarm.
Figure 4-16 PIR Alarm
3. Select a camera to congure.
4. Check PIR Alarm.
5.
Oponal: Check Save VCA Picture to save the captured of PIR alarm pictures.
6. Set the arming schedule.Refer to Congure Arming Schedule .
7. Set the linkage acons. Refer to Congure Linkage Acons .
8. Click Apply.
4.3.13 Target
Detecon
In live view mode, the target detecon funcon can achieve smart detecon, facial detecon,
vehicle detecon, and human body detecon during the last 5 seconds and the following 10
seconds.
Steps
1. In Live View mode, click Target
Detecon to enter the target detecon interface.
ATM Digital Video Recorder User Manual
48