25
©2017 Hill-Rom Services, Inc. ALL RIGHTS RESERVED.
205278 rev 2 13-SEP-2017 ENG – US
When the bed senses the patient back in bed, the bed exit system will
automatically rearm.
Silence and reset the Bed Exit Alarm without ever turning it off!
• For Position and Exiting modes, the patient needs to be in the center of the
bed for Bed Exit to resume monitoring.
• For the Out of Bed mode, the bed will resume the Bed Exit monitoring
when the patient gets back into bed.
If the bed is unplugged for transport when the Bed Exit is armed, the alert will
automatically re-arm when plugged back into power. It does NOT work on
battery backup.
GRAPHICAL CAREGIVER INTERFACE (GCI)® TOUCHSCREEN
To Next Page
Loading...
