Hill-Rom P1441B - Page 19

Safety Tips
Chapter 1: Introduction
Hill-Rom® Basic Care™ Bed, Hill-Rom® 305 Manual Bed, Page 1 - 11
Hill-Rom® 405 Electric Bed Service Manual (MAN336 REV 2)
1
CAUTION:
Use care when you remove the indicator caps. Failure to do so could
cause damage the indicator cap.
CAUTION:
Use caution when you cut the wire ties. Failure to do so could cause
cable damage.
CAUTION:
Keep enough slack in the cables to allow the bed to move through its
full range of motion. Make sure the bed cables do not bind and do not
have any force applied to them. Failure to do so could cause equipment
damage.
CAUTION:
Do not use harsh cleansers/disinfectants such as a scouring pad, heavy
duty grease removers, solvents such as toluene, xylene, or acetone.
Equipment damage could occur.
CAUTION:
Do not use silicone-based lubricants. Equipment damage could occur.
CAUTION:
Put the removed PC boards in antistatic protective bags to ship or store
the PC boards. Equipment damage can occur.
CAUTION:
Make sure that your hands are clean, and only handle the PC boards
by their edges to prevent component damage.
CAUTION:
Wear an antistatic strap when you handle electronic components.
Failure to do so could cause component damage.