Final Actions
Chapter 2: Troubleshooting Procedures
Page 2 - 4 Hill-Rom® Basic Care™ Bed, Hill-Rom® 305 Manual Bed,
Hill-Rom® 405 Electric Bed Service Manual (MAN336 REV 2)
13. If the bed has central brake and steer, put the pedal into the steer position.
The steer caster locks, and all of the other casters swivel freely.
Yes No
↓→Replace the brake and steer caster (refer to procedure 4.25 on
page 4-54).
14. If the bed has central brake and steer, put the pedal into the brake position.
Try to move the bed out of its position. The bed does not move.
Yes No
↓→Replace the brake caster (refer to procedure 4.25 on page 4-54).
15. If the bed has individual brake and steer casters, press the brakes on each
caster that has that function. Try to move the bed out of its position. The
bed does not move.
Yes No
↓→Replace the casters that do not operate correctly (refer to
procedure 4.27 on page 4-61).
16. If the bed has individual brake and steer casters, press the steer on the
caster that has function. The steer caster locks and all other casters swivel
freely.
Yes No
↓→Replace the steer caster (refer to procedure 4.27 on page 4-61).
17. Call Hill-Rom Technical Support at 800-445-3720 (USA).
Final Actions
1. Do the necessary preventive maintenance procedures. See “Preventive
Maintenance Checklist” on page 6-8.
2. Do all of the necessary administration tasks.
To Next Page
Loading...
