Hilti DX 9–ENP Operating Instructions

English 3
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
This symbol is intended to draw special attention to certain points when handling the product.
1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols are used on the product:
Warning: hot surface
1.3.2 "Must do" symbols
The following "must do" symbols are used on the product:
Wear protective gloves
General symbol for "must do"
Read the operating instructions
Wear a hard hat
Wear eye protection
Wear ear protection
1.4 Declaration of conformity
We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
1.5 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Direct fastening tool DX 9–ENP
Generation 01
Serial no.
2 Safety
2.1 Safety instructions
This documentation contains important instructions on how to use the fastening tool safely and correctly.
You can avoid residual hazards through observance and practical implementation of the safety instructions
found in this documentation and on the product.
Printed: 30.04.2019 | Doc-Nr: PUB / 5491711 / 000 / 00

Hilti DX 9–ENP Specifications

General

Brand	Hilti
Model	DX 9–ENP
Category	Power Tool
Language	English