HIMA HIMatrix F30 Safety Manual

HIMatrix 2 Intended Use
HI 800 023 E Rev. 1.01 Page 13 of 72
2.3.5 ESD Protective Measures
Only personnel with knowledge of ESD protective measures may modify or extend the
system or replace a module.
NOTE
Electrostatic discharge can damage the electronic components within the HIMatrix
systems!
 When performing the work, make sure that the workspace is free of static, and
wear an ESD wrist strap.
 If not used, ensure that the modules are protected from electrostatic discharge,
e.g., by storing them in their packaging.
2.4 Requirements to be met by the operator and the machine and system
manufacturers.
The operator and the machine and system manufacturers are responsible for ensuring that
HIMatrix systems are safely operated in automated systems and plants.
The machine and system manufacturers must validate that the HIMatrix systems are
correctly programmed.

HIMA HIMatrix F30 Specifications

General

Brand	HIMA
Model	HIMatrix F30
Category	Controller
Language	English