HIMA HIMatrix F60 - 8 Operation; 8.1 Handling; 8.2 Diagnosis

System Manual Modular Systems 8 Operation
HI 800 191 E Rev. 2.02 Page 97 of 114
8 Operation
This chapter describes how to handle and diagnose the controller during its operation.
8.1 Handling
The controller needs not be handled during its normal operation. Only if problems arise, an
intervention with the PADT may be required.
8.2 Diagnosis
A first, rough diagnosis can be performed via the light-emitting diodes (LEDs). The diagnostic
history that can be displayed using the programming tool provides a more detailed analysis of
the operating or error state.
8.2.1 Light-Emitting Diode Indicators
The light emitting diodes (LEDs) indicate the module state. Function and meaning of the LEDs
depend on the processor system's operating system currently in use. Refer to the device-
specific or module-specific manuals for details.
The function and meaning of the fieldbus LEDs are described in the communication manual.
Version
Manual
Document number
CPU OS V7
and higher
SILworX Communication Manual
HI 801 101 E
CPU OS up
to V7
HIMatrix PROFIBUS DP Master/Slave Manual
HI 800 009 E
HIMatrix Modbus Master/Slave Manual
HI 800 003 E
HIMatrix TCP S/R Manual
HI 800 117 E
HIMatrix ComUserTask (CUT) Manual
HI 800 329 E
Table 60: Manuals Describing the Communication LEDs
8.2.2 Diagnostic History
The diagnostic history records the various states of the processor system and communication
system and stores them in a non-volatile memory. Both systems include a short term and a long
term diagnosis. The number of entries differs for hardware layout and the operating system
versions:
CPU
COM
Number of entries in the long term
diagnosis
700
300
Number of entries in the short term
diagnosis
700
700
Table 61: Maximum Number of Entries in the Diagnostic History for CPU 03
CPU
COM
Number of entries in the long term
diagnosis
935
230
Number of entries in the short term
diagnosis
468
655
Table 62: Maximum Number of Entries in the Diagnostic History - up to CPU OS V7