Hioki PW3336-01 - Names and Functions of Parts

1.3 Names and Functions of Parts
13
1.3 Names and Functions of Parts
The shift state is automatically canceled after Approx. 10 seconds. When the RECTIFIER key or a parameter
key is pressed, the shift state is canceled after Approx. 2 seconds.
Function setting status lamps
(for each channel) (p.18)
Light up to indicate when settings differ
from default settings.
CH/ RECTIFIER (p.46)
Switches the displayed channel and
rectifier (in the shift state).
Parameter keys (p.14)
Switch display parameters.
Warning lamps
(for each channel)
(p.19)
Current range (p.48)
(Pressing 200 mA in the
shift state selects auto-
range operation.)
CH
Switches the chan-
nel to configure.
(For both voltage
and current)
POWER switch (p.35)
Turns the instrument on and off.
Front Panel
Display
Switches between measured
values and setting values.
Voltage range (p.48)
(Pressing 15 V in the
shift state selects auto-
range operation.)
e.g.) PW3337-03
HRM/ ORDER SEL
Harmonic display (switch among level, content percentage, and
normal display)
HOLD/ MAX/ MIN
Holds display values, switches between maximum and minimum
values (in the shift state).
SHIFT/ EXIT/ LOCAL
Activates/deactivates the shift state; exits settings mode or remote
mode.
START/STOP /DATA RESET
Starts/stops integration, resets integrated values (in the shift state).
Function setting
keys (p.40)
Configure functions.
Function setting status lamps
(p.18)
Light up to indicate activated func-
tions.