3.8 Using D/A Output
91
The instrument provides dedicated terminals for analog level output/waveform output for voltage, current, and
active power as well as active power sum level output/high-speed active power sum level output.
There are also terminals for high-speed active power level output (fixed output) for each channel as well as
active power sum level output and high-speed active power sum level output.
Terminals can be switched between analog output and waveform output and between active power sum level
output and high-speed active power sum level output on the Settings screen. Additionally, the rectifier can be
set for analog output.
When output is set to Std. (analog output), the rectifier can be selected.
Output voltages
Level output, high-speed level output: ±2 V DC for ±100% of the range
Waveform output: 1 V f.s. for 100% of the range
3.8.1 Analog Level Output, Waveform Output,
and High-speed Active Power Level Output
Terminal Std. (level output) FASt (waveform output, high-speed output)
U1/u1 U1 CH1 voltage u1 CH1 instantaneous voltage waveform
U2/u2 U2 CH2 voltage u2 CH2 instantaneous voltage waveform
U3/u3 U3 CH3 voltage u3 CH3 instantaneous voltage waveform
I1/i1 I1 CH1 current i1 CH1 instantaneous current waveform
I2/i2 I2 CH2 current i2 CH2 instantaneous current waveform
I3/i3 I3 CH3 current i3 CH3 instantaneous current waveform
P1/p1 P1 CH1 active power p1 CH1 instantaneous power waveform
P2/p2 P2 CH2 active power p2 CH2 instantaneous power waveform
P3/p3 P3 CH3 active power p3 CH3 instantaneous power waveform
Psum/Hi-Psum Psum active power sum HiPsum high-speed active power sum
Hi-P1 CH1 high-speed active power (fixed) -
Hi-P2 CH2 high-speed active power (fixed) -
Hi-P3 CH3 high-speed active power (fixed) -
To Next Page
Loading...
