Hioki SM-8213 - Setting a Variety of Functions; Setting the Timer; Setting the Comparison GO;NO Judgment Level

28
6.6 Setting a Variety of Functions
A variety of useful functions can be set when the RANGE selector switch is
set to any position other than the CAL , and by using the SELECT, UP and
DOWN switches.
Each time the SELECT switch is pushed, the LCD display is changed in the
order of the Measuring Display → C. SET → M. SET → COMP. → BUZZ
→ Measuring Display .
C. SET : Charging timer setting
M. SET : Measuring time setting
COMP. : GO/NO judgment level setting
BUZZ : Buzzer sound ON/OFF setting
6.6.1 Setting the Timer
Example: Setting a measuring time to 50 seconds
Fig. 6.6.1
1) Press the SELECT switch twice to show the M. SET indication in the
lower left area of the LCD for the measuring timer setting mode.
2) Using the UP and DOWN switches, set the time indication in the upper
center area of the display to 050 seconds.
3) Press the SELECT switch 3 times to return to the measuring display.
To accelerate the change of a value, keep the corresponding UP or DOWN
switch pushed.
6.6.2 Setting the Comparison GO/NO Judging Level
Example: Setting a judgment of NO<100MΩ≦GO for 100 V test voltage
Fig. 6.6.2
ＶＯＬＴＡＧＥ
ＲＡＮＧＥ
０５０
DOWN UP
２
100
2
×10
Ｍ.ＳＥＴ
ｓ
CHARGE MEASURE/DISCHARGESELECT
ＭΩ
１０
２０１０５２１．５
１００Ｖ
ＶＯＬＴＡＧＥ
ＲＡＮＧＥ
DOWN UP
100
２
2
×10
ＣＯＭＰ
ｓ
CHARGE MEASURE/DISCHARGESELECT
ＭΩ
１０
２０１０５２１．５
０００
１００Ｖ