vii
Organization of This Operation Manual
This operation manual contains the following 10 sections.
1. PREPARATION BEFORE
OPERATION
This section describes precautions for unpacking and AC line voltage setting.
2. SPECIFICATIONS
This section describes the specifications for the SM-8200 Series super megohmmeters and
optional accessories.
3. OPERATING PRINCIPLE
This section describes the operating principle with a block diagram of the SM-8200 Series.
4. FAMILIARIZATION WITH CONTROLS AND PARTS
This section describes the functions of the controls and parts on the front and rear panels.
5. PREPARATION FOR MEASUREMENT
This section describes the LCD display in detail for the measuring mode, setting mode and
operations. A variety of measured value display methods are also given.
6. MEASUREMENT
This section provides details for function setting, connection to the work to be measured, and
usage of a variety of optional measuring jigs and electrodes.
7. RS-232C INTERFACE
This section describes the application of the serial port interface.
8. REMOTELY CONTROLLED MEASUREMENT
This section describes the remote measuring function.
9. INTRODUCTION OF OPTIONALS
This section describes the optional accessories, including guard chips, DC signal outputs, and
others.
10. MAINTENANCE AND MISCELANEOUS
This section describes maintenance and calibration.
11.
EXTERNAL APPEARANCE
This section includes front, rear and side view illustrations of the instrument with dimensions.
To Next Page
Loading...
Need help?
General
