Installation BAT
Release
05
03/2013
17
1.1.4 BAT300 types
The BAT300 is a dual-band industrial high-performance wireless LAN
access point/client in accordance with IEEE 802.11a/b/g/h and 802.11n. The
devices provide a higher radio output with a bandwidth of up to 300 Mbit/s.
They support MIMO (Multiple Input Multiple Output) and Multipath. The
bandwidth is increased by using the multipath transmission by means of
reflections. Three antennas for sending and receiving ensure more stable
network coverage with fewer shadow areas (see following figure).
Figure 1: Schematic representation of MIMO (Multiple Input Multiple Output)
1.1.5 BAT-BG/BGN types
BAT-BG/BGN devices only support the use of the
2.4 GHz ISM wave band.
Note: Note that the function descriptions for the BAT-BG/BGN devices in this
installation guide and in the user manuals for the devices only apply to
operation with 2.4 GHz.
Hirschmann supports you by providing country profiles. These profiles help
you to conform to the requirements of the country in which you are operating
the WLAN installation.
Make sure you always set the correct country profile.
To Next Page
Loading...
Need help?
General
