68
Installation BAT
Release
05
03/2013
Underlying norms and standards
The device has a certification based on a specific standard only if the
certification indicator appears on the housing.
However, with the exception of Germanischer Lloyd, ship certifications
are only included in the product information under www.hirschmann.com.
Name
72/245/EWG, 2006/28/EG Directive on radio interference (electromagnetic tolerance) for
motor vehicles.
Certified devices are marked with an e1 type approval indicator.
EN 50155 Railway applications – electronic systems in railway vehicles
EN 55022 IT equipment – radio interference characteristics
EN 60079-15 Electrical equipment for explosive gas atmospheres – part 15:
Construction, testing and marking of protection type "n" electrical
apparatus.
EN 61000-6-2 Generic norm – immunity in industrial environments
EN 61131-2 Programmable logic controllers
FCC 47 CFR Part 15 Code of Federal Regulations
EN 60950-1 Safety for the installation of IT equipment
IEEE 802.3af Power over Ethernet
IEEE 802.1 D Switching, GARP, GMRP, Spanning Tree
IEEE 802.1 D Media access control (MAC) bridges (includes IEEE 802.1p
Priority and Dynamic Multicast Filtering, GARP, GMRP)
IEEE 802.1 Q Tagging
IEEE 802.1 Q Virtual Bridged Local Area Networks (VLAN Tagging, GVRP)
IEEE 802.1 w Rapid Reconfiguration
IEEE 802.3 Ethernet
IEEE 802.11a/b/g/h/i/n WLAN
Table 13: List of norms and standards.
Certified devices are marked with a certification indicator.
To Next Page
Loading...
Need help?
General
