Installation MSP30/32/40/42 and MSM20/22/24/40/42/46/50
Release
12
06/2018
51
2Installation
The devices have been developed for practical application in a harsh
industrial environment.
Hirschmann supplies the device ready for operation.
Perform the following steps to install and configure the device:
Checking the package contents
Installing the SD card (optional)
Installing and grounding the device
Connecting the terminal blocks
Installing terminal blocks, switching on the supply voltage
Installing media modules
Connecting an I/O module
Installing an SFP transceiver (optional)
Connecting data cables
2.1 Checking the package contents
Check whether the package includes all items named in the section
“Scope of delivery” on page 89.
Check the individual parts for transport damage.
2.2 Installing the SD card (optional)
Applies only to device variants featuring customer-specific version with the
characteristic value HH.
Note: Only use the AutoConfiguration Adapter ACA31 storage medium.
See “Accessories” on page 89.
Deactivate the write protection on the SD card by pushing the write-
protect lock towards the middle of the card.
Push the SD card into the slot with the beveled corner facing upwards.
Tighten the thumb screw hand-tight to fix the SD card.
Note: For information about the position on the device see “View from above”
on page 29.
To Next Page
Loading...
Need help?
General
