64
Installation MSP30/32/40/42 and MSM20/22/24/40/42/46/50
Release
12
06/2018
3 Basic Settings
The IP parameters must be entered when the device is installed for the first
time. The device provides the following options for configuring IP addresses:
AutoConfiguration Adapter
Entry via the HiDiscovery protocol in the applications HiDiscovery or
Industrial HiVision application
Input via the V.24 interface
Configuration via BOOTP
Configuration via DHCP (Option 82)
You will find more information in the “Basic Configuration User Manual”.
Default settings
Ethernet ports: link status is not evaluated (signal contact)
IP address: The device looks for the IP address using DHCP
Optical ports: Full duplex
TP ports: Autonegotiation
Management password:
user, password: public (read only)
admin, password: private (read/write)
Rapid Spanning Tree Protocol: activated
V.24 data rate: 9600 Baud
To Next Page
Loading...
Need help?
General
