PowerMICE
Release
01
04/2014
51
Open variant product code
As an alternative to the order number (see in table 18, last column) you
can use the product code. This gives you a wider range of variants when
selecting the media module that is specially tailored to your requirements.
The product code of your media module is made from combining the
desired product characteristics in accordance with the following table.
The short designation is in "Ident." column.
Example: Product code MM30-O7O7O7O7SA = media module
1000 Mbit/s with four Gigabit Ethernet combo ports (four SFP ports or
alternatively TP ports RJ45). This example corresponds to the MM4-4TX/
SFP module with the order number 943 010-001.
MM23-S2S2T1T1... 5.5 W 18.8 Btu (IT)/h 0 °C to +60 °C - “ -
MM23-F4F4T1T1... 5.5 W 18.8 Btu (IT)/h 0 °C to +60 °C - “ -
MM30-O7O7O7O7... 9.0 W 30.8 Btu (IT)/h See table 19 - “ -
MM30-O7O79999... 5.8 W 19.8 Btu (IT)/h - “ - - “ -
MM33-O7O79999... 7.5 W 25.6 Btu (IT)/h 0 °C to +60 °C - “ -
Expansion module:
MB-2T 0 W 0 Btu (IT)/h 0 °C to +60 °C 943 733-102
Module Power
consump-
tion
Power output Operating
temperature
(ambient air
temperature)
Order
number
Table 18: Other modules: power, temperature, order numbers
To Next Page
Loading...
Need help?
General
