Connecting to External Devices
Enable device auto power off
Press / button on your remote control and select Settings > Connection > HDMI & CEC > Device
Auto Power Off.
Set to On to turn off HDMI & CEC compatible external devices when the TV is turned off.
Enable device auto power on
Press / button on your remote control and select Settings > Connection > HDMI & CEC > Device
Auto Power On.
Set to On to turn on HDMI & CEC compatible external devices when the TV is turned on.
This feature is applicable when TV input source is pre-set to the corresponding external device.
Enable TV auto power on
Press / button on your remote control and select Settings > Connection > HDMI & CEC > TV
Auto Power On.
Set to On to turn on the TV when HDMI & CEC compatible external devices are turned on.
HDMI format function
Press / button on your remote control and select Settings > Connection > HDMI & CEC > HDMI
Format.
Please select Enhanced format if your HDMI device supports 4K HDR. If it does not support 4K HDR, please
select Standard format. If you are not sure, please select Auto.
Note:
• HDMI cables must be used to connect HDMI & CEC compatible devices to your TV.
• The HDMI & CEC feature of the connected device must be turned on.
• If you connect a HDMI device that is not HDMI & CEC compatible, the HDMI & CEC control features will
not work.
• Depending on the connected HDMI device, the HDMI & CEC control feature may not work.
• The HDMI & CEC feature supports One Touch Play, Routing Control, System Standby, Device OSD Name
Transfer, Remote Control Pass Through, Give Device Power Status, System Audio Control.
• This function may not be applicable in some models/countries/regions.
Related information
HDMI & CEC Issues on page 78
Control the TV with a Keyboard, Mouse or Gamepad
Connect a keyboard, mouse or gamepad to control your TV with ease.
Connect a USB keyboard, mouse or gamepad
Plug the keyboard, mouse or gamepad cable into the USB port of your TV.
Connect a Bluetooth keyboard, mouse or gamepad
Locate the Bluetooth device by pressing / button on your remote control and select Settings >
Connection > Bluetooth > Equipment Management.
37
To Next Page
Loading...
