Connecting to External Devices
Connecting Speakers or Other Audio Receivers
To connect speakers or other audio receivers with an audio cable (not provided), see the illustration below.
Ensure the audio connected devices are switched on before switching on the TV.
When the connection is completed, press / button on your remote control, select Settings > Sound
> Audio Output and select the SPDIF option.
When a digital audio system is connected to the DIGITAL AUDIO OUT port, decrease the TV volume and use
your digital audio system to control the volume.
Note:
• If you prefer to use Audio Return Channel (ARC) or enhanced Audio Return Channel (eARC), please refer
to Connecting to External Devices > Connecting a Digital Audio System with ARC/eARC in this manual.
•
You can connect the DIGITAL AUDIO OUT port on the back of the TV to the optical port on the amplifier.
Then press / button on your remote control and select Settings > Sound > Audio Output
Settings > Digital Audio Output Format to choose Dolby Audio - Dolby Digital to receive the Dolby
Digital audio.
Related information
Select Speakers on page 52
Connecting a Digital Audio System with ARC/eARC
If you would like to use the Audio Return Channel (ARC) or enhanced Audio Return Channel (eARC) feature
to send sound from the TV by a HDMI cable to a digital sound system, you can connect it to the HDMI (ARC/
eARC) port of your TV.
By using this feature, you can also control the sound system with your TV remote instead of using the remote
controls from the connected devices.
After the connection:
1. Power on the sound system.
2.
Press / button and select Settings icon on the Home screen.
44
To Next Page
Loading...
Need help?
General
Weight and Dimensions
