Hisense 32A5KQ User Manual

Settings Overview
Dolby Atmos
Set Dolby Atmos to On to enhance the richness of sound allowing a more immersive listening experience.
Note:
• This function may not be applicable in some models/countries/regions.
Audio Enhancement
Set Audio Enhancement to enjoy the audio performance of Dolby Atmos, DTS Virtual X. Enable or disable
according to your own preference.
Note:
• This function may not be applicable in some models/countries/regions. Selections may vary depending on
models.
• When Hi-Res is selected, some options in Sound settings may not be available for setup.
Sound Bar Settings
When a soundbar device is connected to the TV, you can change the Sound Bar Settings via the Settings
menu for best device audio quality.
When an ARC device is connected to the TV, the sound output is automatically switched to ARC. If the user
switches to other sound output channels, the soundbar menu cannot be adjusted but the sound menu of TV
can be adjusted.
When you connect a soundbar with a HDMI cable, you should set CEC Control to On by pressing /
button on your remote control, then select Settings > Connection > HDMI & CEC > CEC Control.
• EQ Modes
You can select Music, Movie, News, Sport, Night.
• Surround Modes
You can set to On to turn on the Surround Modes.
• Bass Level/Treble Level/Dimmer Level
You can adjust Bass Level/Treble Level/Dimmer Level.
• Reset
Reset current Sound Bar Settings to factory mode.
Note:
• This function is only applicable for the specific soundbar types.
Related information
Connecting Speakers or Other Audio Receivers on page 44
Connecting a Digital Audio System with ARC/eARC on page 44
Connect a Bluetooth Device on page 38
Connecting Headphones on page 42
Network
You can get access to the Internet through your TV.
54

Hisense 32A5KQ Specifications

General

Operating system version	U6
Operating system installed	VIDAA
Hybrid Broadcast Broadband TV (HbbTV) version	2.0.3
Audio decoders	Dolby Digital, DTS, DTS Virtual:X, DTS-HD, Dolby MS12
RMS rated power	16 W
Number of speakers	2
Audio output channels	2.0 channels
Screen shape	Flat
Response time	9.5 ms
Display diagonal	32 \
Display brightness	200 cd/m²
Display technology	QLED
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Direct-LED
Contrast ratio (typical)	3000:1
Display diagonal (metric)	80 cm
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	-
Audio formats supported	AAC, AC3, FLAC, M4A, MP3, OPUS, PCM, WAV, WMA
Image formats supported	BMP, GIF, JPEG, JPG, PNG
Video formats supported	ASF, AVI, FLV, H.264, H.265, HEVC, MKV, MOV, MP4, MPEG, MPEG1, MPEG2, MPEG4, MPG, TS, VOB, WMV, WMV3
High Dynamic Range (HDR) supported	No
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Tuner type	Analog & digital
Digital signal format system	DVB-C, DVB-S2, DVB-T2
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	50 W
Power consumption (standby)	0.5 W
Power consumption (typical)	27 W
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Stand type	Legs stand
Product color	Black
Panel mounting interface	100 x 200 mm
Package type	Box
Package depth	114 mm
Package width	811 mm
Package height	515 mm
Package weight	5600 g
Repairability index	6

Weight and Dimensions

Stand width	617 mm
Depth (with stand)	179 mm
Width (with stand)	721 mm
Height (with stand)	452 mm
Weight (with stand)	3900 g
Depth (without stand)	73 mm
Height (without stand)	430 mm
Weight (without stand)	3800 g