Settings Overview
Headphone with Speakers, the TV speakers, headphones and other connected audio devices will have
audio output.
Audio Out with Speakers, the TV speakers and headphones will have audio output simultaneously, and the
volume can be adjusted simultaneously.
Note:
• When you set built-in speakers and earphones to have audio output at the same time, the sound effect of
the speakers may change.
Headphone Volume
Independently adjust the volume of the Headphones.
In Headphone Only mode, you can adjust the volume by the remote or in Headphone Volume menu on
screen.
In Headphone with Speakers mode, the TV speaker volume can be adjusted by the remote. The volume of
headphone can be adjusted in Headphone Volume menu on screen.
Digital Audio Output Format
Select the digital audio output format that best suits the audio device type.
• Auto: the audio device automatically outputs in a supported format.
• Pass Through: the audio device outputs without any processing.
• PCM: the audio device outputs PCM (pulse code modulation) format.
• Dolby Audio - Dolby Digital: the audio device outputs Dolby Digital audio when connected to the TV via
the optical port.
• Dolby Audio - Dolby Digital Plus: the audio device outputs Dolby Digital Plus audio when connected to
the TV via the HDMI (ARC/eARC) port.
• DTS Surround: the audio device outputs DTS audio when connected to the TV via the optical port or
HDMI(ARC/eARC) port.
Note:
• Due to the differences between different models, options above may vary according to the actual product.
•
This function is only applicable when / > Settings > Sound > Audio Output is set to ARC
(eARC) or SPDIF.
Digital Audio Output Delay
Adjust the digital audio output delay time to sync audio from an external speaker with the images on the TV.
Note:
•
This function is only applicable when / > Settings > Sound > Audio Output is set to ARC
(eARC) or SPDIF.
HDMI-eARC
Connect an audio device that supports eARC via HDMI (eARC) and set HDMI-eARC to On to enjoy higher
sound quality. This feature is available to set when / > Settings > Sound > Audio Output is set to
ARC(eARC).
Note:
• This function may not be applicable in some models/countries/regions.
53