Hisense 32A5KQ User Manual

Connecting to External Devices
Select the content you want to play or view. For more information, please refer to Entertainment > Media in
this manual.
Use the USB storage device function
The USB storage device function can be used to record and view digital broadcast programmes.
Read the precautions below before recording or viewing programmes by using the USB storage device
function.
Note:
• Be sure to select the correct country/region for use.
• Use of the recording function may not be applicable depending on the selected country/region. Use with
incorrect settings may violate certain laws or other regulations, and may result in criminal punishment. In
such cases, our CORPORATION and the Group shall bear no responsibility whatsoever.
• Recorded programmes saved in the USB storage device can only be viewed on this TV. They cannot be
viewed when connected to another TV (including the same model of TV), a PC, or other devices.
• You cannot watch one channel while recording another.
• If the recording time to the USB storage device is too short, no data may be saved.
• You cannot record video input signals in the USB device.
• Not all types of broadcast may be recordable.
• After programming the TV to record digital broadcasting, do not disconnect the power plug before
recording starts.
• If video or audio recording fail due to malfunction of the TV or poor reception, no compensation shall be
paid.
• Certain digital cameras may not be compatible with the TV.
Connecting Headphones
You can connect a pair of headphones (not provided) to the HEADPHONE port on your TV. While the
headphone is connected, the sound from the built-in speakers will be disabled.
Note:
• Headphone port may not be available in some models.
• Headphones with microphones are not supported.
•
If Headphone with Speakers is selected at / > Settings > Sound > Audio Output Settings >
Headphone > Headphone Mode, the headphone and the TV will have sound output at the same time.
Related information
Audio Output Settings on page 52
42

Hisense 32A5KQ Specifications

General

Operating system version	U6
Operating system installed	VIDAA
Hybrid Broadcast Broadband TV (HbbTV) version	2.0.3
Audio decoders	Dolby Digital, DTS, DTS Virtual:X, DTS-HD, Dolby MS12
RMS rated power	16 W
Number of speakers	2
Audio output channels	2.0 channels
Screen shape	Flat
Response time	9.5 ms
Display diagonal	32 \
Display brightness	200 cd/m²
Display technology	QLED
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Direct-LED
Contrast ratio (typical)	3000:1
Display diagonal (metric)	80 cm
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	-
Audio formats supported	AAC, AC3, FLAC, M4A, MP3, OPUS, PCM, WAV, WMA
Image formats supported	BMP, GIF, JPEG, JPG, PNG
Video formats supported	ASF, AVI, FLV, H.264, H.265, HEVC, MKV, MOV, MP4, MPEG, MPEG1, MPEG2, MPEG4, MPG, TS, VOB, WMV, WMV3
High Dynamic Range (HDR) supported	No
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Tuner type	Analog & digital
Digital signal format system	DVB-C, DVB-S2, DVB-T2
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	50 W
Power consumption (standby)	0.5 W
Power consumption (typical)	27 W
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Stand type	Legs stand
Product color	Black
Panel mounting interface	100 x 200 mm
Package type	Box
Package depth	114 mm
Package width	811 mm
Package height	515 mm
Package weight	5600 g
Repairability index	6

Weight and Dimensions

Stand width	617 mm
Depth (with stand)	179 mm
Width (with stand)	721 mm
Height (with stand)	452 mm
Weight (with stand)	3900 g
Depth (without stand)	73 mm
Height (without stand)	430 mm
Weight (without stand)	3800 g