Settings Overview
• Sleep Timer
Set the sleep timer to automatically turn the TV off at the specified time.
• Power On Timer
Set the time you want the TV to turn on automatically. You can set the same time each day or set a
different time on different days.
• Power Off Timer
Set the time you want the TV to turn off automatically. You can set the same time each day or set a
different time on different days.
• Menu Timeout
Set the amount of time you would like the menu to remain on the screen.
• Auto Sleep
Set the amount of time that you would like the TV to auto power off after a period of no activity.
This function may not be applicable in some models/countries/regions.
• Auto Standby with No Signal
TV will go to standby if there is no signal after the set time.
Set Language and Location
Press / button on your remote control and select Settings > System > Language and Location.
Select the language used for this TV and your location.
• Location
Choose the location from where you will watch your TV.
• Postcode
User can change the Postcode. This function may not be applicable in some models/countries/regions.
• Menu Language
Set the default language for the TV menu.
Use System PIN
Press / button on your remote control and select Settings > System > System PIN.
Change the PIN that you use to access Parental Control, Auto Channel Scan and Reset to Factory Defaults.
Edit TV Name
Press / button on your remote control and select Settings > Connection > TV Name.
You can edit the name for your TV to be used on the network.
Note:
• Up to 18 characters can be entered.
Power Indicator Mode Setup
Press / button on your remote control and select Settings > System > Advanced Settings >
Power Indicator.
57
To Next Page
Loading...
