Safe Operation
2-1
All operators, including experienced UTV drivers
or passengers, should carefully read and fully
understand this Users Manual, and operate
strictly as the manual states in order to achieve
the best performance and avoid accidents.
Others who will use you UTV should be trained
how to operate the UTV and be required to read
this manual before operation.
1. Safety Instructions:
1. Understand this UTV by reading this manual
and underst
anding all the components of the
vehicle. Only start and operate the vehicle
after finishin
g reading this manual.
2.
Pay close attention to the warning
and
caution labels on the UTV.
3. Understand completely and learn to use
the
safety devices (roll-over protective structure,
seat belt
s), and never change original safety
devices. If safety devices are damaged,
consult your local dealer for replacement.
Always use seat belts.
Bench Seat
① Roll-over protective structure；
② Seat belts
Bucket seat
① Roll-over protective structure；
② Seat belts
4. Do not wear loosen articles of clothing
during operation, as these can be drawn into
moving
parts on the vehicle and could cause
a severe injury to occur
.
You should always wear protective equipment,
such as helmet, boots, eye protection, ear
protection, and gloves etc.
5.
Only a qua
lified driver should operate this
UTV
. Never operate after drinking, using
drugs or controlled products
, or while
fatigued.
6.
Always perform the pre-operation checks
as
following:
1) C
heck seat belt for worn or damaged, if
necessary
, replace it.
2) Check brakes, throttle, brake pedal and
other mechanical parts for proper operation.
If you discover any irregularities, replace
related parts as necessary. Periodically
check
the fitting
s and fastener
s.
3)
Check engine oil level and engine coolant
level.
4) Check t
hat the UTV is equipped to handle
To Next Page
Loading...
