Hisun 750UTV - Machine Troubleshooting

Troubleshooting
11
-4
MACHINE TROUBLESHOOTING
Trouble Cause Countermeasure
Non agility for Gearshift
 High idling speed of engine
 Replace throttle cable;
 Replace throttle petal
 Replace the throttl
e
 High rotary speed for clutch
connection
.
 Replace he junior clutch spring;
 Replace the primary clutch.
 Non good adjust for gearshift
stay wire.

Put the gearshift rod into the
position of “N”.
 Put the gearshift arm of engine
into ”N”.
 Adjust the stay wire and the bolt
.

Lock tightly
.
 Gear abrasion  Replace the gears
Transmission noise
 Big matching clearance for the
inne
r and outside gears
of
tr
ansmission shaf
t

Replace the gears
 Big clearance of transmission
gea
rs.

Replace the gears
 Non good connection of gear
end face
 Replace the gears
Less vehicle power
 Parking brake  Loosen the lay-up rod
 Non full Uncoupling for disc
brake
 Contact the distributor.
 CVT transmission sliding

Removing the grease for th
e
clutch.
Replace CVT transmission belt
Replace the clut
ch.
No good brake or noise
 Less brake o
il 
Check the braking oil level
 Air inside the braking system.  Contact the distributor.
 Brake discs abrasion  Contact the distributor.
 Assembling bolt of disc plate
loo
s
e

Lock
tightly
 Assembling bolt for disc brake
clip
pers loose
 Lock
tightly
If you have any questions, consult your local dealer.