Table 3-43 Web console
Item Operation
Importing the LP certificate Resources > Modules > All Modules > Server Blades >
Server Blades x > LPAR Manager tab > Edit button >
Certificate settings > Import LP certificate
Table 3-44 HVM management command (HvmSh)
Item Command name
Importing the LP
certificate
1
opr HvmCACertificateRegist
Notes:
1. After registering the signed server certificate, save the LPAR manager
configuration information by executing the opr HvmSecureCmmConfigSave
command or the opr SaveConfig command.
You can register the signed server certificate only on the LPAR manager
where the CSR is created.
Authentication of the other system
When LPAR manager tries to connect to the other system using TLS, it can
authenticate the other system by verifying the other system's certificate. For
authentication, register a certificate of the other system or a certificate of CA
that has signed the certificate of the other system in the LPAR manager, and
enable the certificate verification.
The other system can be authenticated by the following operations:
Table 3-45 Web console
Item Operation
Importing the certificate Resources > Modules > All Modules > Server Blades >
Server Blades x > LPAR Manager tab > Edit button >
Certificate settings > Import certificate
Table 3-46 HVM management command (HvmSh)
Item Command name
Importing the certificate
1
opr HvmClientCertificateRegist
Configuring certificate
verification
opr HvmIfSecureVerify
Configuring syslog server
certificate verification
opr AuditLogConfig
Notes:
3-36
High Reliability Functions
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
