Hitachi CB 520H A1 User Manual

processor binding or disable the guest NUMA, you must reconfigure this
configuration.
Note:
• When there are an LPAR on which a processor number is specified and an
LPAR on which no processor number is specified, activate the LPAR on
which the processor number is specified first.
Physical Processor Configuration
The following functions are possible in the Physical Processor Configuration
screen.
Example of Physical Processor Configuration is below.
Figure 7-10 Physical Processors Configuration Screen
The following table describes each item on this screen.
Table 7-11 Details of Physical Processors Configuration Screen
No. Item Description
Default
Value
Supported
LPAR
manager
Version
(1) Processor# Displays the physical processor numbers. - 01-0X~
(2) Blade# Displays the server blade number on which
the physical processor is installed.
- 01-0X~
(3) Socket# Displays the die number/socket number in
the server blade.
- 01-0X~
7-32
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Hitachi CB 520H A1 Specifications

General

Brand	Hitachi
Model	CB 520H A1
Category	Server
Language	English