Message Content Safe mode was turned off.
Explanation Safe mode was turned off. Save configuration information.
What to do None.
Message Content Shadow Command was retried.
Explanation A request to LPAR manager Assist was retransmitted.
What to do None.
Message Content Shared FC MCK Log was logged in LPAR at expansion card.
Explanation Shared FC fault information was stored in the LPAR.
What to do None.
Message Content Shared FC MCK Log was logged in LPAR.
Explanation Shared FC fault information was stored in the LPAR.
What to do None.
Message Content
The LPAR migration functionality has recovered from an
error.
Explanation The network connection between the LPAR manager and the
management module recovered, and the LPAR manager
functionality can now be used.
What to do None.
Message Content
The port numbers for the virtual COM consoles were
recovered from port duplication.
Explanation Port duplication was eliminated, and the virtual COM console
function can now be used.
What to do None.
Message Content Thermal error was restored.
Explanation A temperature rise warning was released.
What to do None.
Audit log messages
The following table shows audit log messages.
9-56
Messages
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
