Hitachi CB 520H A1 - LP Options

LP Options
The following functions are available in the LP Options screen. Example of LP
Options screen is below.
Figure 7-75 LP Options Status Screen
The following table describes each item on this screen.
Table 7-34 Details of the LP Options Status Screen
No. Item Description
Default
Value
Supported
LPAR
manager
Version
(1) Pre-State Auto
Activation
Specifies whether or not to return the
LPARs to their status before rebooting
when LPAR manager is rebooted
without shutting down the LPAR
manager system.
Yes: Restores the LPAR to the status it
had before the LPAR manager system
reboots.
No: Does not restore the LPAR to the
status it had before the LPAR manager
system reboots.
No 01-0X~
(2) LP Auto
Shutdown
Specifies whether or not shut down the
LPAR manager system if all LPARs have
become deactivated.
Yes: Shuts down the LPAR manager
system.
No: Does not shutdown the LPAR
manager system.
No 01-0X~
Operation by LPAR manager Screen
7-105
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide