Figure 7-71 Selecting of the" LPAR RTC"
• Press F7: Change System Time Zone on the Date and Time screen to
display a sub-screen. Set a time zone and press Enter.
Figure 7-72 Setting of the Time-zone
• Adjust the time of LPAR using Adjust LPAR Time on the Date and Time
screen.
Figure 7-73 Selecting of the "ALL LPAR"
• Save the configuration using F9: Save Configuration on the LPAR
manager Menu screen.
Figure 7-74 Saving of the LPAR manager Config
7-104
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
