Figure 8-4 LP system logs Screen (LPAR manager Dump Collected)
Note:
• The "LPAR manager dump transfer succeeded" LP System Logs entry is
normally obtained in about 10 and 20 seconds after the LPAR manager
dump collection operation is performed. If you do not get this log entry,
press Esc to display the LPAR manager Menu screen and then redisplay
the LP system logs screen. (That is because the LP system logs screen
does not automatically update)
If you do not get the two "LPAR manager dump transfer succeeded" LP
System Logs entries after 10 minutes or more, or if you get the "LPAR
manager dump transfer failed" log entry, another failure may have
occurred. So call maintenance personnel or reseller.
Exports LPAR manager Dump
1. Select Dump log from Menu tree.
8-4
LPAR manager Dump Collection
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
