Hitachi CB 520H A1 User Manual

1. Move cursor onto Mem column of target LPAR then press Enter key.
Adjust memory size on appeared sub-screen by using arrow keys then
press Enter key.
Figure 5-22 Allocating the Memory
2. Memory size is set to the target LPAR.
Figure 5-23 Confirmation Screen for memory configuration
Setup of LPAR manager
5-17
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Hitachi CB 520H A1 Specifications

General

Brand	Hitachi
Model	CB 520H A1
Category	Server
Language	English