10. Select the boot device to create boot option.
Tip:
• Set the virtual drive configuration if CD/DVD device is not recognized.
• For a logical EFI boot, select EFISECTOR or ANACONDA as the boot
device to create boot option.
Note that the displayed information might vary depending on the boot
medium.
The example of EFISECTOR following:
EFISECTOR,
[Acpi(PNP0A08,0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x
0,0x0)/USB(0x2,0x0)/Unit(0x0)/CDROM(0x1,0x958,0x1C11
Setup of LPAR manager
5-45
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
