9. Select Continue.
10. Press any key immediately one time, when "Press any key to boot from
CD or DVD" is displayed.
Tip:
• If you press any key slowly, the install tool of the DVD-ROM assigned
to the LPAR may not boot. In that case, deactivate the LPAR once,
and activate the LPAR again.
• If you press any key multiple times, "Windows Boot Manager" might
be displayed. In this case, select Windows Setup [EMS Enabled],
and continue the setup.
5-56
Setup of LPAR manager
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
