Hitachi CB 520H A1 - Page 252

No. Item Description
Default
Value
Supported
LPAR
manager
Version
VN: Displays the total number of Logical
NICs.
(19) Act Total
(Total
resources use
by LPAR)
Displays the total resources on all the
LPARs which are activated.
Pro: Displays the total number of logical
processors.
Shr: Displays the total number of logical
processors in the sharing mode.
Ded: Displays the total number of logical
processors in the occupation mode.
Mem: Displays the total memory amount
in megabytes.
VN: Displays the total number of Logical
NICs.
- 01-0X~
(20) Remain
(Configurable
memory)
Displays the remains of configurable
memory to be used by LPARs in MB:
Total memory for LPAR minus total
memory currently used by LPAR.
The isolated memory by a detection of
memory failure is not reflected to this
display.
- 01-0X~
(21) User Memory Displays the total amount of memory
that can be allocated to the LPARs in
units of MB.
Displays the memory capacity installed
in the server blade minus the amount
used by LPAR manager.
The isolated memory by a detection of
memory failure is not reflected to this
display.
- 01-0X~
(22) Processors
(Number of
processors)
Displays the total number of physical
processors.
The format is "n(m)".
n: Displays the total number of physical
processors that are normally active.
m: Displays the total number of physical
processors installed in the server blade.
Displays the total number of physical
processors per mode.
Shared: Displays the total number of
physical processors in the shared mode.
Dedicate: Displays the total number of
physical processors in the dedicated
mode.
- 01-0X~
7-14
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide