Hitachi CB 520H A1 - Page 254

NUMA Setting Deactivate Activate
Non-NUMA A A
NUMA A 0 to Maximum Node
or
M
NUMA Setting Deactivate Activate
Non-NUMA A A
NUMA A
or
0 to Maximum Node
0 to Maximum Node
or
M
Results of the LPAR manager screen operations are below.
Table 7-6 LPAR Status on the LPAR Configuration Screen
Item
Status of LPAR
Remark
Supported
LPAR
manager
Version
Activate Deactivate Failure
Name N Y N - 01-0X~
Sta Y Y N - 01-0X~
Scd Y Y N - 01-0X~
Pro N Y N - 01-0X~
Grp
C
1
Y N - 01-0X~
Srv
C
1
C
1
N - 01-0X~
Mem N Y N - 01-0X~
VN N N N Displays only 01-0X~
PN N N N Displays only 01-2X~
MN N C N Can be
changed only
if NUMA is
enabled for
the EFI.
01-2X~
ID Y Y N - 01-0X~
AA N Y N - 01-0X~
AC N Y N - 01-0X~
PC
C
1
C
1
N - 01-0X~
VC Y Y N - 01-0X~
PB N Y N - 01-0X~
7-16
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide