Figure 7-5 Virtual Console Enabling Screen
Place the cursor on the VC column of the LPAR line whose virtual COM
console function you want to enable, and then press F1 to display a sub-
screen. Select a VC number to connect by moving the cursor with the ↑ and ↓
keys, and then press the Enter key.
As a result, you can connect to the LPAR guest screen via telnet. The TCP
port to be used at the connection via telnet can be found in the comment that
appears when pointing VC column of the LPAR line.
Figure 7-6 Virtual Console Mapping Screen
7-24
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
