No. Item Description
Default
Value
Supported
LPAR
manager
Version
F: Fibre Channel
U: USB controller
(6) Schd Sets the PCI device's scheduling mode.
D: Assigns to an LPAR in the dedicated
mode.
E: Assigns to an LPAR in the exclusively
shared mode.
S: Assigns to an LPAR in the shared mode.
- 01-0X~
(7) PCI Device
Assignment
Sets the assignation of the PCI device to
LPARs.
*: unassigned
A: assigned but not activated
R: activated and attached
-: cannot be assigned
PCI device is set USB automatic attach that
is shown "#" when an assignment status is
"A" or "R".
"!" is displayed on the right of the slot
number when the PCI device is not
recognized for the reason that the PCI
device is removed through the hot-plug
operation or powered off due to a failure
causing the blockade of the PCI device.
- 01-0X~
(8) Selected
PCI Device
Information
Displays the information for the PCI device
selected with the cursor.
#: Displays the number that LPAR manager
gives each PCI device for identification
purposes.
Vendor: Displays the vendor name (up
to15 characters)
Device Name: The device name (up to 31
characters)
Slot#: Displays the slot number.
Bus#: Displays the bus number of the PCI
configuration space
Dev#: Displays the device number of the
PCI configuration space
Func#: Displays the function number of the
PCI configuration space
"!" is displayed on the right of the slot
number when the PCI device is not
recognized for the reason that the PCI
device is removed through the hot-plug
operation or powered off due to a failure
causing the blockade of the PCI device.
- 01-0X~
Operation by LPAR manager Screen
7-41
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
