No. Item Description
Default
Value
Supported
LPAR
manager
Version
(3) Slot# Displays the physical slot number to which
the FC is inserted.
- 01-0X~
(4) Port# Displays the port number of the FC. - 01-0X~
(5) SchMd Displays the FC's scheduling mode.
D: Allocated to an LPAR in the dedicated
mode.
S: Allocated to an LPAR in the shared
mode.
D 01-0X~
(6) vfcID Displays the configured vfcWWNID if the
allocated FC is in the shared mode.
Displays "-" for anything other than the
shared FC.
- 01-0X~
(7) WWPN Displays the FC's World Wide Port Name.
Displays "?" for non-Hitachi fibre channel
adapters and NICs for which the FCoE
functionality is enabled.
- 01-0X~
(8) WWNN Displays the FC's World Wide Node Name.
Displays "?" for non-Hitachi fibre channel
adapters and NICs for which the FCoE
functionality is enabled.
- 01-0X~
WWPN
(Migration)
Displays World Wide Name for FC
temporarily used in LPAR migration in
concurrent maintenance mode. This item is
displayed when WWN (Migration) is
selected in item (1).
Displays "?" for non-Hitachi fibre channel
adapters and NICs for which the FCoE
functionality is enabled.
Displays "-" for an unsupported FC adapter.
- 01-3X~
(9) Vfc Seed
Info.
Displays the Vfc seed information used in
creating WWN.
- 01-0X~
(10) Pages Numerator: Displays the current page.
Denominator: Displays the total number of
pages.
- 01-0X~
How to change displaying WWN
Place the cursor on Select Display on the upper right and press Enter to
display a sub-screen. On the sub-screen, select item to display, and press
Enter.
7-62
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
