No. Item Description
Default
Value
Supported
LPAR
manager
Version
Expired: The expiration date has passed.
NaN: The state is other than the above.
(29)
Host key
2
Displays the host key to be used for SSH
connection to virtual COM console.
--- 02-05~
(30) Generate
Host Key
1
Re-creates a host key to be used for SSH
connections to virtual COM console.
--- 02-05~
(31) User
Information
2
Displays user information.
Name: Displays the name of the user.
Remain: Displays the password
expiration date.
--- 02-05~
(32) Function Key Displays the function keys that can be
used in this screen.
F10: Used when changes are reflected in
the LPAR manager system.
[LPAR manager firmware version: 02-05
or later]
F1: Used when adding a user.
F2: Used when deleting a user.
F3: Used when changing the password.
F11: Scrolls the page to the left to show
the screen.
F12: Scrolls the page to the right to
show the screen.
--- 01-0X~
Notes:
1. When the firmware of LPAR manager is version 02-45 or later, only management
module users who have the LPAR manager security permission can perform this
operation.
2. When the firmware of LPAR manager is version 02-45 or later, this item is displayed
only for management module users who have the LPAR manager security
permission.
Table 7-27 VNIC System No
Item
LPAR manager firmware version
01-01 or later 01-4x or later
Range of settable VNIC System
No
1 to 128 1 to 1024
The following table describes each operation on this screen.
Operation by LPAR manager Screen
7-69
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
