• Operation with F10 (Update system Config) provides a temporary change
in the screen when LPAR manager is running. Thus, the setting, which is
not saved, will disappear when LPAR manager is rebooted. Execute F9
(Save configuration) in the LPAR manager Menu screen to save the new
setting.
• If you change a BSM IP address, BSM alert port, or Alert language in this
screen, the setting values are effective only during LPAR manager running
and not saved with F9 (Save Configuration). When you reboot LPAR
manager, the value set in the management module will become the initial
value.
How to change user authentication for the virtual COM console
connection
Note:
• When the firmware of LPAR manager is version 02-45 or later, only
management module users who have the LPAR manager security
permission can perform the following operations.
[LPAR manager firmware version 02-05 or later]
Place the cursor on VC, and then press Enter. On the displayed sub-screen,
select Enable/Disable, and then press Enter. After the setting is completed,
the configuration information is automatically saved.
If VC is Disable, Telnet connections cannot be established to IPv6 LP IP
addresses.
How to change user authentication for the LP CLI connection
Note:
• When the firmware of LPAR manager is version 02-45 or later, only
management module users who have the LPAR manager security
permission can perform the following operations.
[LPAR manager firmware version 02-05 or later]
Place the cursor on LP CLI, and then press Enter. On the displayed sub-
screen, select Enable/Disable, and then press Enter. After the setting is
completed, the configuration information is automatically saved.
How to set the password expiration date
Note:
• When the firmware of LPAR manager is version 02-45 or later, only
management module users who have the LPAR manager security
permission can perform the following operations.
[LPAR manager firmware version 02-05 or later]
7-74
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
